Tag: video

Works

Works with Config

Not Working

This list contains a list of IP cameras that have been tested with the Gigabytes NVR. Most cameras that support MJPEG or have a snapshot URL should work with motion-based NVR software (like Gigabytes NVR and MotionEye) but, occasionally, the camera contains some quirk that makes it incompatible or requires special / additional configuration to make it work.

Agasio M1051
URL	/videostream.cgi	Port	81
User	admin	Pass
Notes

Dlink DCS‑930L, 932L, 934L
URL	/video.cgi	Port	80
User	admin	Pass	admin
Notes	Will DHCP on wired connection first. Can configure wireless from there (where available).

Dlink DCS‑935L
URL	/image/jpeg.cgi	Port	80
User	admin	Pass
Notes	This uses the still image URL.

Tenvis IP602W IP391W
URL	/vjpeg.v?user=operator&pwd= /vjpeg.v	Port	7777
User	admin operator	Pass	admin –
Notes	Gigabytes configures the port to 80

IP Webcam Android App
URL	/video	Port	8080
User		Pass
Notes	This is an Android app that turns a phone into a webcam. IP Webcam | IP Webcam Pro

TP-Link TL-SC3130G
URL	/jpg/image.jpg	Port
User		Pass
Notes

Linksys WVC54GCA, WVC80N Sensormatic/ADT OC810 Level One FCS-0040, WCS-0020
URL	/img/video.mjpeg	Port
User		Pass
Notes

Amcrest  IP2M-844E
URL	MJPEG: /cgi-bin/video.cgi HD: /cgi-bin/snapshot.cgi	Port	80 37777
User	admin	Pass	admin
Notes	1. Set Substream to MJPEG 2. Set Main stream to 720p

Foscam FI9851P, FI9853EP, FI9804P, FI9821W
URL	Snapshot (HD): /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=admin&pwd= MJPEG Init: /cgi-bin/CGIProxy.fcgi?cmd=setSubStreamFormat &format=1&usr=admin&pwd= MJPEG Stream: /cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin&pwd=	Port	88 888
User	admin	Pass
Notes	See also: Foscam Setup. Use Snapshot URL for HD. Init URL enables MJPEG stream but may not work on cameras with newer firmware. Pan/tilt controls (where applicable) should be operated from camera back-end. User and password must be transmitted in the stream URL (ex. &usr=admin&pwd=1234)

Dahua DH-IPC-DW13A0SN
URL	/axis-cgi/mjpg/video.cgi	Port	80,37777
User	admin	Pass	12345
Notes	You will need to configure the sub stream for MJPEG and 640×480 before this will work. See also Amcrest IP2M-844E.

Sricam AP003
URL	/videostream.cgi?user=admin&pwd=	Port	81
User	admin	Pass
Notes	User and password must be transmitted in the stream URL.

Uniden AppCam21
URL	/videostream.cgi?stream=0	Port	80
User	admin	Pass	123456
Notes	Motion errors: Unrecognized content type Error reading first header – re-trying Wireless SSID: Serial#  Password: 12345678

Tenvis IP391W-HD
URL	Currently testing the following URLs: /web/cgi-bin/hi3510/snap.cgi?&-getstream&-snapone /videostream.asf?user=[USERNAME]&pwd=[PASSWORD] /tmpfs/auto.jpg /snapshot.jpg?account=[USERNAME]&password=[PASSWORD]	Port	80
User	admin	Pass	admin
Notes	Use firefox for video: download browser-plugin-vlc from Apper. You may need to disable the Mplayer/gecko plugin so it does not conflict. One of the above URLs is reported to work but we have not tested to verify.